System House, Horndon Industrial Park, West Horndon CM13 3XL

|      01277 812888

 Product: WIDOCRYL-Point Fix PV Anchoring System

Applications

 WIDOPAN PRODUCTS ARE AVAILABLE FOR USE BY FULLY TRAINED & APPROVED INSTALLERS.

View Courses

WIDOPAN Product

WIDOCRYL-Point Fix PV Anchoring System

WIDOCRYL-Point Fix uses a unique fastening technology protected by registered design for photovoltaic and solar installations.

Conventional mechanical fixings for photovoltaic and solar systems (modules and rails) on flat roofs involve drilled holes and additional loads, which often lead to damage to the roof membrane and water ingress.

Using our specially designed resin, you are gaining an ultra-strong, fast curing fixing system with no need for screw connections or superimposed loads.

Simple application methods mean installation is completed in minutes.

WIDOCRYL-Point Fix is especially suitable for industrial units with lightweight flat roofs where weight loading is an issue.

This well established Widopan Product has been subject to rigorous testing.

The adhesive tensile strength values determined by the Braunschweig Materials Testing Centre Germany are many times the holding forces for wind suction load required by DIN 1055.

All manufacturers of renewable energy systems for solar and photovoltaic installations, as well as licensed specialist companies in this field, can take advantage of this fastening technology.

Key Benefits

  • No drilled holes
  • No screw holes which might lead to leaks
  • No additional imposed loads
  • Greater holding force in the event of wind suction loads
  • Bridging of height differences in the roof membrane
  • No heat bridges

Product Downloads

Product Information

WIDOCRYL-Point Fix PV Anchoring System

The WIDOCRYL-point liquid waterproofing fixing system is designed especially for light roof constructions where no additional weight can be applied. Using the correct primer, WIDOCRYL-point adheres to almost every surface and the attachments are permanently waterproof. It can be combined with most fixing profiles.

The material basis of WIDOCRYL-Point is urethane-modified methyl methacrylate resin (PMMA), which has been made slightly thixotropic for use in the forming of details. Polyester Fleece G 225 is used to reinforce the junctions. The reinforcement determines the breaking strength and elongation at break and ensures an even layer thickness. It is matched on site to the special features of the structural component.

The overlap of reinforcement layers must be at least 5 cm. The overlap to other materials is to be determined individually for each case, but should not be less than 10 cm.

WIDOCRYL-Point is UV-stable and therefore resistant to ageing.

For professional installation of roof structures, it is necessary to check the roof sealing for secure fixing, load bearing and general ageing condition.

Further details can be found in the safety data sheet.

Basis

Urethane-modified methyl methacrylate resin

Consumption

Approx. 3,5 kg/m²

Reinforcement

Polyester Fleece G225

Curing with hardener (at + 20,0 °C/ 50 % rel.
humidity)

Rainproof after approx. 15 min.
Trafficable after approx. 30 min.

Water vapour diffusion resistance (μ)

approx. 5,150

Basic colour

Window grey

Packaging unit

13.00 kg

Minimum working temperature

-5° C

Temperature resistance

-30°C to + 80°C

Cleaning in fresh condition

WIDOPAN-Cleaner

Storage

If container is kept closed and storage temperature held constantly between +15°C and +20°C, the prod-uct may be used for up to 6 months.

Latest Updates

WIDOPAN Projects